Send Message
China Butt Weld Fittings manufacturer

TOBO GROUP  

TOBO International Trading(Shanghia)Co.,Ltd       Tianda Oil Pipe Co., Ltd

TOBO Pipeline Equipment Co.,Ltd        TPCO & TISCO Pipe(Tianjin)Co.,Ltd.                        

News

December 28, 2021

Nickel Alloy Steam Heating 1000mm ASTM B906 UNS N06600 Steel Plate

ASTM B637, B 670, B 906 UNS N06600 Steel Plate High Temperature Resistant

Quick Details

Place of Origin: Shanghai, China (Mainland) Type: Nickel plate Application: Nitrate condenser,Steam heating pipes,etc
Grade: Ni-Cr-Fe alloy Ni (Min): 38 Powder Or Not: Not Powder
Ultimate Strength (≥ MPa): 550 Elongation (≥ %): 35 Model Number: Incoloy 718

 

Packaging & Delivery

 

Packaging Details: Wooden Cases
Delivery Detail: delivery time is according to the actual order

 

Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.

 

UNS Number N06600

Other common names: Alloy 600

I

 

Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.

 

In what form is Inconel 600 Available at Mega Mex?

· Sheet

 

· Plate

 

· Bar

 

· Pipe & Tube (welded & seamless)

 

· Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)

 

· Wire

 

What are the characteristics of Inconel 600?

· Resistant to a wide range of corrosive media.

 

· Virtually immune to chlorine ion stress corrosion cracking

 

· Non-magnetic

 

· Excellent mechanical properties

 

· High strength and good weldability under a wide range of temperatures

 

Chemical Composition, %

 

Ni + Co Cr Fe C Mn S Si Cu
72.0 min 14.0-17.0 6.0-10.0 .15 max 1.00 max .015 max .50 max .50 max

 

In what applications is Inconel 600 used?

· Chemical industry

 

· Aerospace

 

· Heat treating industry

 

· Pulp and paper industry

 

· Food processing

 

· Nuclear Engineering

 

· Gas turbine components

 

Fabrication with Inconel 600

Alloy 600 can be both hot formed and cold formed using typical processes. Hot working should be performed between 1600° F and 2250° F avoiding any work between1200-1600° F because the ductility decreases in this temperature range. Welding Alloy 600 can be achieved via shielded metal-arc welding, TIG, and MIG.

 

ASTM Specifications

 

Pipe Smls Pipe Welded Tube Smls Tube Welded Sheet/Plate Bar Forging Fitting Wire
B167 B517 B163 B516 B168 B166 B564 B366  

 

Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material

 

Product Form Condition Tensile (ksi) .2% Yield (ksi) Elongation (%) Hardness (HRB)
Rod & Bar Cold-Drawn 80-100 25-50 35-55 65-85
Rod & Bar Hot-Finished 80-100 30-50 35-55 65-85
Tube & Pipe Hot-Finished 75-100 25-50 35*55 -
Tube & Pipe Cold-Drawn 80-100 25-50 35-55 88 Max
Plate Hot-Rolled 80-105 30-50 35-55 65-85
Sheet Cold-Drawn 80-100 30-45 35-55 88 Max

 

Nickel Alloy Steam Heating 1000mm ASTM B906 UNS N06600 Steel Plate 0

 

Contact Details