Monel K500 Stainless Steel Seamless Pipe 3" Elbow 90LR Heavy Machining OEM

Alloy Steel Monel K500 UNS N05500NACE MR0175 3'' Elbow 90LR STD Pipe Fittings
 
Monel K-500 is readily fabricated by standard commercial procedures.
Welding alloy K-500 is best accomplished by the gas-tungsten-arc welding process. It is recommended that Monel K-500 be annealed when it is welded and that any weldments be stress relieved prior to aging.
Heavy machining of this alloy is best accomplished when the material is in the annealed condition or hot-worked and quenched condition. Age-hardened material however can be finish-machined to close tolerances and fine finishes. Therefore, the recommended practice is to machine slightly oversize, age-harden, then finish to size. During aging, a slight permanent contraction takes place, but little warpage occurs because of the low temperatures and slow cooling rates involved.

Specifications

Mechanical Properties

Typical Room Temperature Tensile Properties of Annealed Material