14”LWN FLANGE FF,,THICKNESS 10S ASTM A105 SIZE: 5"- 2500#, SCH.80,CS,ASTM A182 F1

ASTM A182 Gr F1 Blind Flanges is a solid disk used to block off a pipeline or to create a stop. It is similar to a regular flange, it has mounting holes around the perimeter and the gasket sealing rings are machined into the mating surface.

A182 Gr F1 Threaded Flanges are widely demanded and are also known as screwed flange, and it is having a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

A182 Grade F1 Socket Weld Flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.

SA 182 Gr F1 Slip on Flanges are also called SO flange. It's a flange which slides over the pipe with an internal design are slightly larger than the pipe.

F1 A182 Alloy Steel Flanges is an alloy steel formulated for primary forming into wrought products. Its specified properties are appropriate for the annealed condition. F1 is the ASTM designation for this material and its UNS number is K12822.

A182 F1 Cl2 Pipe Flanges has a very low electrical conductivity among wrought alloy steels in the same category. In addition, it has a moderately low embodied energy and base cost.

A182 F1 material is a forging material specification for F1 grade alloy steel and it is used for manufacturing bare forgings or forged and machined products for applications which involves high temperature service.

F1 steel Plate Flange is often a cost effective solution, when raised faces and hubs are not required and for the applications with no or low pressure at ambient temperatures.
 

ASTM A182 F1 Lap Joint Flanges is a two piece device that is much like a weld-neck flange but also like a loose slip-on flange. It has an advantage to swivel around the stub end and pipelining.

SA182 F1 Forged Flanges are used as a linking part to create a pipework network for cylinders, valves, pumps, and other devices. Incorporate of two different sections of the machinery. In order to render the structure stronger, it should be an attachment of a frame.

A182 F1 Cl2 Blind Flange Chemical Composition Chart

FAQ