Material Tested EN 10204 3.1 Butt Weld Fittings Elbow 316L EN 10253-2 DN50

For many projects, the paperwork matters as much as the product. These material tested EN 10204 3.1 butt weld fittings come with a full mill test certificate that ties the finished elbow back to its heat number, chemistry and mechanical test results.

An EN 10204 3.1 certificate is issued by the manufacturer independently of the purchaser and records the actual chemical composition, tensile strength, yield strength and elongation of the material. For engineers who must prove material compliance to a client or inspector, material tested butt weld fittings with 3.1 documentation are essential.

This 316L elbow is manufactured to EN 10253-2 DN50, pickled and passivated, and released only after dimensional, PMI and hydrostatic checks. The certificate is issued in English and can be supplied with third party endorsement on request.

We can provide 3.1 certified butt weld fittings across elbows, tees, reducers, caps and stub ends in stainless, carbon, alloy and nickel alloy grades. If your project requires traceability from mill to site, our documented butt weld fittings give you the records you need.

• Full EN 10204 3.1 mill test certificate with every shipment
• Traceability from heat number to finished elbow
• Chemistry, tensile and yield results recorded on the certificate
• Third party endorsement available on request
• Dimensional, PMI and hydrostatic testing before release
• Available across all butt weld fittings product types

• Certified oil and gas projects
• Pharmaceutical and food plant validation
• Power plant and utility contracts
• Water and wastewater infrastructure
• Any project requiring full material traceability

Every Material Tested Butt Weld Fittings is packed in seaworthy wooden cases or pallets with protective end caps. We offer customized marking and labeling, and can consolidate mixed sizes in a single shipment to reduce your freight cost and handling time.

As a Material Tested Butt Weld Fittings manufacturer, we support custom sizes, wall thicknesses and materials, and arrange third party inspection such as SGS, BV or TUV on request. Our engineers review every enquiry and recommend the material, wall thickness and standard that best match your pressure, temperature and corrosion requirements.

Each Material Tested Butt Weld Fittings order is dimensionally inspected against the applicable standard before dispatch, and our quality team retains a sample record that can be re-tested on request. We also welcome factory audits and pre-shipment inspections from overseas buyers, and can supply reference projects and test reports to support your tender documents.

It is a mill test certificate issued by an independent inspection body or the manufacturer's QA department, stating actual test results rather than typical values.

Chemical composition, tensile strength, yield strength and elongation, plus impact results where applicable, all linked to the heat number of the material tested butt weld fittings.

Yes. We can arrange SGS, BV, TUV or client witness inspection and endorsements on request.

Yes. We supply 3.1 certified butt weld fittings as standard, and 2.2 certificates are available for less critical applications.